Camelway desin and manufacture concrete batching plant since 1983. More >>

+8613027618609

Master These, You Can Really Understand the Sand Making Machine

Thomas Huang posted this article in June 30, 2020

In actual production, the output of the sand making machine is related to many factors, such as: the hardness of the material, the humidity, the fineness of the finished sand, the maintenance of the equipment and the quality of itself. So what are the factors that affect the output of the sand making machine, Camelway takes you to understand.
Different crushed materials
Different materials have certain differences in their hardness, viscosity, humidity, etc., and the amount of sand produced by the sand making machine during crushing will also be different. details as follows:
1. The viscosity of the material
The greater the viscosity of the material, the easier it is to adhere. The material with high viscosity will stick to the inner wall of the sand making cavity in the sand making machine. If it cannot be cleaned in time, it will seriously affect the working efficiency of the sand making machine and seriously affect the normal working of the sand making machine. Therefore, when selecting materials, it must be noted that the viscosity of the material cannot be too large.
2. Composition of materials
The more fine powders in the material before sand making affect the sand making, because these fine powders are easy to adhere and affect the transportation. Therefore, materials with a large amount of fine powder should be screened in advance, and the fine powder should be selected from the materials as much as possible, so as not to affect the normal operation of the sand making machine.
3. Humidity of materials
If the water content is high, the material will easily stick when it is crushed in the sand making machine, and it will also be easily blocked during the material conveying process, resulting in a reduction in sand making capacity.
To solve this problem, first of all, the humidity of the material must be strictly controlled when the material is selected. If the humidity of the material is too high, the percentage of moisture in the material can be reduced by means of sunshine or air drying.
Finished sand has different fineness
The higher the fineness requirement, that is, the finer the material required for sand production, the smaller the sand production capacity. This aspect depends on the specific requirements of the concentrator. If there are no special requirements, the fineness of the material is generally set to medium fine.
Sand machine model differences
The sand making machine models produced by each manufacturer have certain differences. The sand production and energy consumption of different types of equipment during operation are different. Users should have a certain understanding of their own production when purchasing equipment. Purchasing a suitable type of sand making machine will not only affect the output of the equipment, but may also cause users to spend higher costs.
 Standard operation and regular maintenance
The standard operation and regular maintenance of the sand making machine will also affect the amount of sand produced by the equipment. If a sand making machine is not in standard operation and does not do regular maintenance, it will cause the wearing of the wearing parts of the equipment to be accelerated, which will greatly reduce the life of the equipment and the production volume per unit time is small.
The quality of the sand making machine varies
A high-quality sand making machine not only saves energy and protects the environment, but also can easily reach the expected output of the equipment. Not only that, high-quality equipment manufacturers use new high-wear-resistant materials in production and adopt internationally leading production technology. The produced equipment can well meet the production needs of users, and provide a more favorable guarantee for continuous, efficient and safe production.
Is the design of the sand production line appropriate?
The final output is related to all the equipment of the entire production line. For example, if your output requires 500t/h, then you can not only require the sand production machine to reach 500t per hour, the processing of the front jaw break, cone break, belt conveyor, etc. The quantity should also be matched with it, otherwise the final output will certainly not be reached. The configuration of a production line must consider all factors in order to meet your production capacity requirements.

Hcc6280c37eaa4c9cbb05daaea6d9dcfbf

If you are interested about the construction machinery products for your company or industry, Kindly contact with me.

Email:thomas@camelway.com ;Whatsapp:+86 19937387378


Previous: How to Improve the Cohesion of Low and Medium Strength Concrete?

Next: Typical Failure Problem of Concrete Mixing Plant

Camelway China Camelway Sri Lanka

As a professional concrete machine manufacturer, Camelway has focus on research and sell concrete equipment over 39 years, especially for Sri Lanka. It main products includs Concrete batching plants, Asphalt mixing plants, Block making plants, Concrete mixers, Concrete pumps and rebar equipment. If you need any of them, you can contact us to get the catalogue and quote, hope you well.